Make the curtain as per the size required for living room windows doors

• TAKE A METAL TAPE FOR MEASUREMENT.
• YOU HAVE TO MEASURE WIDTH AND HEIGHT IN INCH.
• FIRST YOU MEASURE WIDTH – ALWAYS TAKE 4 INCHES MORE FROM THE WINDOW EDGE ON BOTH SIDE.
• THEN YOU MEASURE HEIGHT- ALWAYS TAKE 4 INCHES MORE ON TOP AND BOTTON OF THE WINDOW EDGE. IF IT IS DOOR CURTAIN THEN TAKE 4 INCHES MORE ON TOP AND TILL TIP OF THE FLOOR.

YOU SHOULD CONSIDER THE WIDTH OF THE CURTAIN AS 1/3^RD OF THE WIDHT OF FABRIC, AS WE HAVE TO PUT THESE CURTAINS ON ROD SO WE WOULD NEED GOOD GATHERING TO GIVE ELEGANT LOOK TO THE CURTAIN. HENCE ACCORDINGLY THE CALCULATION WILL BE DONE WHILE ORDERING CUSTOMIZE CURTAINS.

IN CASE OF READYMADE CURTAINS, DECIDE THE NUMBER OF CURTAINS YOU WANT AND ORDER THEM.

• TAKE A METAL TAPE.
• MEASUREMENTS WILL BE WIDTH AND HEIGHT IN INCH.
• TO HAVE RIGHT MEASUREMENT OF WINDOW, PLEASE MEASURE THE WIDTH INSIDE THE WINDOW AT THE TOP, MIDDLE AND BOTTOM. TAKE THE LOWEST MEASUREMENT.
• SAME WAY TAKE THE HEIGHT MEASUREMENT INSIDE THE WINDOW ON LEFT, CENTRE AND ON THE RIGHT AND IN THIS TAKE THE LONGEST MEASUREMENT.

YOU HAVE TO DRILL THE CLAMPS OF THE BLINDS ON THE WALL OR THE CEILING AS PER YOUR BLIND PLACEMENT.